How to properly create files
In order to print Rigid Panels (forex, plexiglas, dibond) you need to create one file only.
1. Graphic file
The file you need to create shall be the size you ordered plus 5mm bleed.
If you use raster images in the document and the file size exceeds 70x100cm, the resolution of images can be lowered to 150ppi without any problem, thus making the file smaller.
If you want your panel to have a custom shape, refer to the Custom shape guide to prepare the cut layer too.
Pay attention to the base
In the case of Self-standing Panels, pay attention to the lower side of the graphic document. Consider that the Wedge base has a 30cm base and is 10cm high. Therefore, do not place any logos, texts or graphic designs in this part of the file if you do not want them to be covered.
Checklist
Always remember that your file has to comply with the following features that apply to every file:
- 1:1 scale and 5mm bleed for each side
- CMYK colour model
- High-quality PDF
- Images resolution: 300ppi
- Always check the internal security margins.
For the complete checklist please read out Complete checklist file
Do you still have any doubts?
Ask for our Professional Check
Creating a perfect print file is not always a walk in the park. This is why our support service is ready to help you. In the product settings, you can opt for our Professional Check. In this way, our preprinting department will thoroughly check and fix any problem, if needed.
Otherwise, contact us. We are always willing to resolve any doubt.
Getting around the world of cards has never been easier. Select the filter, compare them and choose yours!